Detail
Please refer to packaging label for country of origin
This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.
This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
4 plastic feet included to protect the floor against scratches.
Only recommended for indoor use.
Seats 4.
Possible to separate for recycling or energy recovery if available in your community.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Removable washable cover.
- Product dimensionsTable length130 cmTable width80 cmTable height75 cmChair width52 cmChair depth59 cmChair height95 cmPackaging infoThis product comes as 9 packagesNÄSINGEtable505.875.07Height7 cmLength134 cmNet weight20.58 kgVolume77.0 lWeight23.08 kgWidth84 cmpackage quantity1BERGMUNDchair cover904.810.52Height5 cmLength22 cmNet weight0.36 kgVolume1.7 lWeight0.40 kgWidth18 cmpackage quantity4BERGMUNDchair frame204.519.06Height19 cmLength61 cmNet weight6.95 kgVolume56.4 lWeight8.15 kgWidth50 cmpackage quantity4
- Care instructionsTableWipe clean with a cloth dampened in a mild cleaner.Wipe dry with a clean cloth.For increased stability, re-tighten the screws about two weeks after assembly and when necessary.Frame, removable coverVacuum clean.Wipe clean with a cloth dampened in a mild cleaner.Wipe dry with a clean cloth.Light stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.For increased stability, re-tighten the screws about two weeks after assembly and when necessary.Removable coverMachine wash, max 40°C, normal process.Do not bleach.Do not tumble dry.Iron, max 150°C.Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.Environment and materialsTableTable top:Particleboard, Acrylic paint, Melamine foil, Plastic edging, PaintTableUnder frame/ Leg:Solid wood, Adhesive, Acrylic paintChair coverBack fabric:100 % polyester (100% recycled)Chair coverTotal composition:100 % polyesterChair frameLeg:Solid wood, Acrylic paintChair frameSeat frame:Steel, Epoxy coatingChair frameBackrest frame:SteelChair frameSupport panel:Polyethylene plasticChair frameBackrest cushion/ Seat cushion:100% polyesterChair frameLining/ Smoulder resistant lining:Polyester wadding
- Item #Assembly instructions505.875.07NÄSINGE table904.810.52BERGMUND chair cover204.519.06BERGMUND chair frameItem #Related documents505.875.07NÄSINGE table
NÄSINGE / BERGMUND
table and 4 chairs, white/Gunnared medium grey white, 130x80 cm
- A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
There are 0 Click &Collect stores near the current address, which can be selected at the time of checkout
After selecting a store, you'll be able to check its stock and the item's shelf location.
